Impreza RS Coupe AWD F4-2.5L SOHC (1999)
![background image](/subaru/impreza_rs_coupe_awd/f4-2.5l_sohc/Page-1131006.png)
8. Tighten adjusting screw until it no longer tightens.
9. Using a wrench [32 mm (1.26 inch) width across flats] or adjustable wrench, remove tie-rod.
CAUTION:
-
Check ball joint for free play, and tie-rod for bends. Replace if necessary.
-
Check dust seals used with tie-rod end ball joint for damage or deterioration. Replace if necessary.
10. Loosen adjusting screw and remove spring and sleeve.
CAUTION: Replace spring and/or sleeve if damaged.
INSPECTION