Impreza RS Coupe AWD F4-2.5L SOHC (1999)
![background image](/subaru/impreza_rs_coupe_awd/f4-2.5l_sohc/Page-1132006.png)
1. Insert ST from pinion housing side and remove oil seal using a press.
ST 34099FA140 REMOVER OIL SEAL
NOTE: Discard removed oil seal.
2. Force-fit oil seal using ST.
ST 34099FA110 INSTALLER
CAUTION: Be careful not lo damage or scratch cylinder inner wall.
NOTE:
-
Apply specified power steering fluid to oil seal.
-
Pay special attention not to install oil seal in wrong direction.
-
Push oil seal until the stepped portion of A contacts end face of B.
Assembly
RACK ASSEMBLY
CAUTION: Use only SUBARU genuine grease for gearbox.