Impreza RS Coupe AWD F4-2.5L SOHC (1999)
Suspension Strut / Shock Absorber: Service Precautions
WARNING: GAS FILLED, DO NOT OPEN, DO NOT HEAT.
CAUTION:
^
On struts which have "GAS FILLED" marked on outer housing under spring seat, completely discharge gas before disposing, following the
methods below.
^
Do not disassemble strut damper or place into a fire.
^
Drill holes before disposing of gas filled struts.
^
Before handling gas filled struts, be sure to wear goggles to protect eyes from gas, oil and/or filings.
1. Place gas filled strut on a flat and level surface with piston rod fully extended
2. Using a 2 to 3 mm (0.08 to 0.12 inch) die drill, make holes in areas shown in the figure.