Impreza RS Coupe AWD F4-2.5L SOHC (1999)
![background image](/subaru/impreza_rs_coupe_awd/f4-2.5l_sohc/Page-894004.png)
5. Clean bearing housing before installing new bearing. Support the bearing housing with 927430000 and position the bearing assembly over the
opening. Using 927440000 begin applying pressure to the bearing.
Note: Do not add additional grease to pre-lubricated bearing.
6. Move the bearing housing back and forth while applying pressure. The bearing will bottom out against a ridge machined into the bearing housing.