subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Sensors and Switches - Body and Frame > < Front Seat|Page 5205
Page 5
background image

3.

Pull knobs on sides of backrest and fold backrest forward.

Carpet Fasteners

4.

Remove screws securing overlapping portions of carpet in luggage compartment.

Center Hinge

5.

Roll up carpet and remove center hinge fasteners.

6.

Tilt left backrest forward until striker engages with lock and remove bolt securing hinge to body.

7.

Pull knob on left backrest up until lock releases. Slide backrest forward and away from body.

8.

Remove bolt securing center hinge of right backrest to body.

9.

Pull knob up until right backrest is released.

10.

While tilting backrest forward, remove hinge pin from hole in bracket, and remove backrest.

INSTALLATION

Install in reverse order with the following notes:
^ Confirm seat belts operate properly.
^ Backrests should latch securely.
^ Backrest should tilt easily.
^ Torque all fasteners according to illustrations.

Sensors and Switches - Body and Frame > < Front Seat|Page 5205