Impreza Sedan AWD F4-1820cc 1.8L SOHC (1993)
Vacuum Brake Booster: Service and Repair
Installation
INSTALLATION
1) Mount brake booster in position.
2) Connect operating rod to brake pedal with clevis pin and snap pin.
3) Connect vacuum hose to brake booster.
4) Mount master cylinder onto brake booster.
5) Connect brake pipes to master cylinder.
6) Connect electric connector for brake fluid level indicator.
7) Adjust operating rod of brake booster as follows;
(1) Be sure engine is off. (No vacuum is applied to brake booster.)
(2) There should be play between brake booster clevis and pin at brake pedal installing portion. (Depress brake pedal pad with a force of less
