Impreza Sedan AWD F4-1820cc 1.8L SOHC (1993)
Turn Signal Lamp: Service and Repair
REMOVAL AND INSTALLATION
HEADLIGHT AND FRONT TURN SIGNAL LIGHT
1. Remove front grille and disconnect connector from headlight.
2. Remove screws which secure front turn signal light.
3. Remove front turn signal light while disconnecting connector.
NOTE: When installing, securely fit clip (on fender side) into locating (on front turn signal light side).
4. Remove screws and bolts which secure headlight and remove headlight.
Tightening torque: 6 - 7 N.m (0.6 - 0.7 kg.m, 4.3 - 5.1 ft.lb)