Impreza Sedan AWD F4-1820cc 1.8L SOHC (1993)
Canister Purge Control Valve: Service and Repair
Purge Control Solenoid Valve
REMOVAL
1. Remove air suction solenoid valve. (California model)
2. Remove bolt which installs bracket of purge control solenoid valve onto collector chamber.
3. Take out purge control solenoid valve with bracket through the bottom of the collector chamber.
4. Disconnect connector and hoses from purge control solenoid valve.
INSTALLATION
1. Connect hoses and connector to purge control solenoid valve.
2. Install purge control solenoid valve with bracket through collector chamber.
3. Tighten bolt which installs bracket of purge control solenoid valve onto collector chamber.
Tightening torque:
14 - 24 N.m (1.4 - 2.4 kg.m, 10 - 18 ft.lb)