Impreza Sedan AWD F4-1820cc 1.8L SOHC (1993)
6. Disconnect airbag connector and horn connector on back of airbag module. Remove airbag module, and place it with pad side facing upward.
7. Using steering puller, remove steering wheel.
CAUTION: Do not allow connector to interfere when removing steering wheel.
8. Remove steering column covers.
9. Removing two retaining screws, remove combination switch.
INSTALLATION
1. Before installing combination switch, check to ensure that combination switch is off and front wheels are set in the straight ahead position.
CAUTION: Failure to do this might damage roll connector.
2. Install column cover and center roll connector.