subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Customer Interest for Brake Fluid Pump Relay: > < ABS Relay - Sticking|Page 12
Page 3
background image

Note: 

It is possible for this condition to occur intermittently. Under these conditions the symptoms may not always be duplicated.

Troubleshooting Steps:

1.

Check if the ABS Hydraulic Unit Motor is running or if you can duplicate the condition.

2.

If the Hydraulic Unit Motor is running, does it continue to run with the key in the off position?

3.

Confirm the trouble code, if any, and trouble shoot according to the Diagnostic Chart in the corresponding Service Manual.

4.

Replace the ABS Hydraulic Unit Motor Relay with a modified one. The new part number is 26735AA012. The new relay can be identified by a
white line under the word Japan on the relay case.

Note: 

Always check the part number supersession for any changes.

5.

If the wiring harness is at fault repair and/or replace as necessary.

The new ABS Motor Relay has been changed in production begining with the following VIN's.

Legacy (SIA built):

Sedan: T*206647
S/W: T*308128
O/B: T*374098

SVX: T*100004

Impreza: Sedan: T*510065
S/W: T*810189
Coupe: T*410116

Customer Interest for Brake Fluid Pump Relay: > < ABS Relay - Sticking|Page 12