subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Rear Door Weatherstrip > < Rear Door Latch|System Diagnosis
Page 1
background image

Rear Door Limiter: Service and Repair

Checker

REMOVAL AND INSTALLATION

1. Remove trim panel.
2. Remove sealing cover.
3. Apply a cloth to door and body to prevent damaging them, and remove checker pin by driving it upward.

CAUTION:  Be careful not to damage door and body.

4.  Completely close door glass.
5.  Loosen two nuts securing checker, and take out checker through access hole in underside. Installation should be made in the reverse order of

removal.

Tightening torque:  
5.4 - 9.3 N.m (0.55 - 0.95 kg.m, 4.0 - 6.9 ft.lb)

Rear Door Weatherstrip > < Rear Door Latch|System Diagnosis