Impreza Wagon FWD F4-1820cc 1.8L SOHC (1995)
![background image](/subaru/impreza_wagon_fwd/f4-1820cc_1.8l_sohc/Page-1617001.png)
Fuel Door: Service and Repair
Fuel Flap
REMOVAL
1. FUEL FLAP
Remove bolts which hold hinge to car body, and detach fuel flap and hinge as a unit.
2. FUEL FLAP OPENER
1. Remove driver's seat, rear seats, center pillar lower cover, floor mat, rear arch cover/rear quarter trim (wagon), and side sill cover (on the
driver's side).
2. Remove all clips which hold cable.
3. Disconnect cable from pull handle.
4. Detach pull handle by removing bolts.
5. Detach fuel lock holder by turning it.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
When installing cover to pull handle assembly, observe the following:
-
Be careful not to catch harness.
-
Engage pull handle assembly pawls firmly.
-
Make sure the clearance between fuel flap and car body is equal at all points.
-
After installing opener cable, ensure it moves smoothly.