Impreza Wagon FWD F4-1820cc 1.8L SOHC (1995)
Wheel Speed Sensor: Service and Repair
Removal
Front ABS Sensor
FRONT A.B.S. SENSOR
1) Disconnect front ABS. sensor located in engine compartment.
2) Remove bolts which secure sensor harness to bracket.
3) Remove bolts which secure front A.B.S. sensor to housing, and remove front A.B.S. sensor.
CAUTION: Be careful not to damage pole piece located at lip of the sensor during removal.
4) Remove front disc brake caliper and disc rotor from housing after removing front tire.
5) Remove front drive shaft and housing and hub assembly.
Fig. 37 Tone Wheel & Hub Assembly
6) Remove tone wheel while removing hub from housing and hub assembly.
CAUTION: Be careful not to damage teeth faces of tone wheel during removal.
Rear ABS Sensor