Impreza Wagon FWD F4-1820cc 1.8L SOHC (1995)
5) While positioning shoes (one at a time) in groove on wheel cylinder, secure shoes.
6) Connect lower shoe return spring.
7) Fix shoes by connecting hold-down cup to hold-down pin.
BRAKE ASSEMBLY
1) Install brake assembly on housing, and tighten bolts to install back plate.
Tightening torque:
52 ± 6 Nm (5.3 ± 0.6 kg-m, 38.3 ± 4.3 ft-Ib.)
2) Install hub.
3) Connect brake pipe, and tighten brake pipe flange nut.
Tightening torque:
14.7 +3/-2 Nm (1.5 +0.3/-0.2 kg-m, 10.8 +2.2/-1.4 ft-Ib.)
4) Set the outside diameter of brake shoes less than 0.5 0.8 mm (0.020 0.031 in) in comparison with the inside diameter of brake drum.
5) Install brake drum.
6) After installing brake assembly, bleed air from brake line.