subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

ABOUT US
Roll Connector <--> [Clockspring Assembly / Spiral Cable, Air Bag]|Description and Operation|Page 4122 > < Roll Connector <--> [Clockspring Assembly / Spiral Cable, Air Bag]|Description and Operation|Page 4120

Impreza Wagon FWD F4-1820cc 1.8L SOHC (1995)

Page 2
background image

7. Using steering puller, remove steering wheel.

CAUTION: Do not allow connector to interfere when removing steering wheel.

8. Remove steering column covers.
9. Removing two retaining screws, remove combination switch.

CENTERING ROLL CONNECTOR

Note: Before installing combination switch and steering gearbox, make sure to center roll connector built into combination switch.

1. Make sure that front wheels are positioned straight ahead.
2. Install gearbox, steering shaft and combination switch properly. Turn roll connector pin clockwise until it stops.
3. Then, back off roll connector pin approximately 2.65 turns until "CENTER" appears on indicator with "Arrow" marks aligned.

INSTALLATION

Roll Connector <--> [Clockspring Assembly / Spiral Cable, Air Bag]|Description and Operation|Page 4122 > < Roll Connector <--> [Clockspring Assembly / Spiral Cable, Air Bag]|Description and Operation|Page 4120