Impreza WRX F4-2.0L DOHC Turbo (2004)
Make a measurement as follows. If it exceeds the specified service limit, adjust or replace.
NOTE: When making a measurement, vise gearbox by using ST. Never vise gearbox by inserting aluminum plates, etc. between vise and gearbox.
ST 926200000 STAND
Sliding resistance of rack shaft:
Service limit 340 N (35 kgf, 76 lbs.) or less
RACK SHAFT PLAY IN RADIAL DIRECTION
Right-turn steering:
Service limit 0.19 mm (0.0075 inch) or less
On condition
L: 5 mm (0.20 inch)
P: 122.6 N (12.5 kgf, 27.6 lbs.)
Left-turn steering:
Service limit
Direction - left/right
0.3 mm (0.012 inch) or less
Direction - up/down
0.15 mm (0.0059 inch) or less
INPUT SHAFT PLAY
In radial direction:
Service limit 0.18 mm (0.0071 inch) or less
On condition P: 98 N (10 kgf, 22 lbs.)
