subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Headlamp Alignment Actuator > < Headlamp Bulb|Testing and Inspection|Page 4787
Page 2
background image

-

Do not leave the headlight without a bulb for a long time. Dust, and moisture, etc. entering the headlight may affect its performance.

1. Remove the ground cable from battery.
2. Remove the headlight assembly.

3. Remove the back cover.

4. Disconnect the harness connector.

5. Remove the light bulb retaining spring, and then remove the bulb.

INSTALLATION

Install in the reverse order of removal.

CAUTION:  Attach the rubber cap with letters TOP on the top so the drain hole will be on the lower side. 

Headlamp Alignment Actuator > < Headlamp Bulb|Testing and Inspection|Page 4787