Impreza WRX STI F4-2.5L DOHC Turbo (2007)
Steering Gear: Service and Repair
Steering Gearbox Disassembly
DISASSEMBLY
TURBO MODEL
1) Disconnect the pipes A and B from steering body and control valve housing.
2) Secure the gearbox removed from vehicle using a C-clamp.
3) Remove the tie-rod end and lock nut from gearbox.
4) Remove the clip on outside of boot using pliers, and then slide the boot to tie-rod end side.
5) Using flat tip screwdriver, remove the band from boot.
NOTE:
Check the boot for crack, damage or deterioration. Replace the boot with a new one if necessary.