Impreza WRX STI F4-2.5L DOHC Turbo (2007)
Steering Gear: Service and Repair
Steering Gearbox Assembly
TURBO MODEL AND STI MODEL
1) Using a press, install the bushing to gearbox installation portion.
2) Apply a coat of grease to inside and outside of new oil seal.
Specified steering grease:
VALIANT GREASE M-2 (Part No. 003608001)
3) Verify the oil seal direction and installation position. Using the ST and press, press fit the oil seal to gearbox.
ST 34199AE130 GEARBOX OIL SEAL INSTALLER
4) Using a C-clamp, attach the steering body as shown in the figure. Apply a coat of grease to needle bearing.
CAUTION:
Ensure the needle bearing is free from defects. If it is faulty, replace the steering body with a new one.
5) Using the ST-B and ST-C, attach the oil seal to ST.A.
ST 34199FE040INSTALLER A, B, C
NOTE:
Face the oil seal in direction shown in the figure.
