Impreza WRX STI F4-2.5L DOHC Turbo (2007)
DISASSEMBLY
1. Using the following table as a guide, verify the type of bushings.
2. Select the ST according to type of bushings used.
Bushing ST: INSTALLER & REMOVER SET
Bushing A927700000
Bushing B927690000
Bushing C927700000
3. Using the ST, press the bushing out of place.
ASSEMBLY
1. Use the same ST that was used during disassembly.
2. If it is difficult to press the bushing into trailing link, apply water-diluted TIRE LUBE to the inner surface of ST as a lubricant.
Specified lubricant: TIRE LUBE: water = 1: 3