Impreza WRX STI F4-2.5L DOHC Turbo (2007)
8) Install the ABS wheel speed sensor on housing.
Tightening torque:
33 Nm (3.4 kgf-m, 24 ft. lbs.)
9) Install the wheel and tighten the wheel nuts to specified torque.
Tightening torque:
90 Nm (9.1 kgf-m, 65.7 ft. lbs.)
DISASSEMBLY
Using the ST and a hydraulic press, drive hub bolts out.
ST 28399AG000 HUB STAND
CAUTION:
^
Be careful not to hammer the hub bolts. This may deform the hub.
^
Do not reuse the hub bolt.
NOTE:
Since the hub unit bearing can not be disassembled, only hub bolts can be removed.
ASSEMBLY
1) Attach the hub to ST securely.
ST 28099PA080 HUB STAND
2) Using a press, Press new hub bolts until their seating surfaces contact the hub.
NOTE:
Use 12 mm (0.47 inch) dia. holes in HUB STAND to prevent bolts from tilting.
INSPECTION