Impreza WRX STI F4-2.5L DOHC Turbo (2007)
STI model
NOTE:
^
Be sure to install the clutch hose with the mark side facing upward.
^
Be careful not to twist the clutch hose during installation.
2) After bleeding air from the operating cylinder, ensure that clutch operates properly.
DISASSEMBLY
NOTE:
Disassembly for operating cylinder of only 5MT model can be performed. That of 6MT model is a component that cannot be disassembled.
1) Remove the boot and push rod.
^
Non-turbo model
Non-turbo model
^
Except Non-turbo model and STI model