Impreza WRX STI F4-2.5L DOHC Turbo (2007)
Hydraulic Hose: Service and Repair
Clutch Pipe and Hose
REMOVAL
1) Remove the air intake chamber and air intake duct. (Non-turbo model)
2) Remove the intercooler. (Turbo model)
3) Drain the clutch fluid.
4) Remove the clutch pipe from the clutch hose and master cylinder.
5) Pull out the clamp, then remove the clutch hose from bracket.
6) Remove the hose from operating cylinder.
7) Remove the bracket.
INSTALLATION
Install in the reverse order of removal.
NOTE:
Bleed air of the clutch fluid.
INSPECTION
Check the pipes and hoses for cracks, breakage, or damage. Check the joints for fluid leakage. If any cracks, breakage, damage or leakage is found,