subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Rear Differential Front Oil Seal|Page 2697 > < Fluid - Differential|Capacity Specifications|Page 2692
Page 1
background image

Seals and Gaskets: Service and Repair
Rear Differential Front Oil Seal

Rear Differential Front Oil Seal 

REPLACEMENT 

1) Set the vehicle on a lift.
2) Disconnect the ground cable from battery.
3) Move the select lever or gear shift lever to "N".
4) Release the parking brake.
5) Remove the oil drain plug, and drain the gear oil.

6) Install the oil drain plug.

NOTE:  
Apply liquid gasket to the drain plug.

Liquid gasket: 

THREE BOND 1105 (Part No. 004403010) or equivalent.

Tightening torque: 

49 Nm (5.0 kgf-m, 36.2 ft. lbs.) 

7) Lift-up the vehicle.
8) Remove the rear exhaust pipe and muffler.
9) Remove the propeller shaft from body. 

10) Remove the self-locking nut while holding the companion flange with ST.

Except STI model
ST 498427200 FLANGE WRENCH
STI model
ST 18633AA000 WRENCH COMPL

11) Remove the center heat shield cover.

Rear Differential Front Oil Seal|Page 2697 > < Fluid - Differential|Capacity Specifications|Page 2692