Impreza WRX STI F4-2.5L DOHC Turbo (2007)
7. Operate the power window switch to move the glass to position shown in the figure, and then remove the two nuts from service holes.
8. Take out the door glass.
CAUTION:
-
Do not turn the regulator in closing direction after removal of the glass. Otherwise gear may be disengaged.
-
Avoid impact and damage to the glass.
INSTALLATION
1. Install in the reverse order of removal.
CAUTION: Make sure the slider (front) and roller (rear) of glass is placed securely in sash.
2. Adjust the front door glass.
Tightening torque: Nm (kgf-m, ft-lb)
T1: 7.4 (0.75, 5.5)
T2: 13.7 (1.4, 10.1)