Impreza WRX STI F4-2.5L DOHC Turbo (2007)
10. Fit the locating pins using suction rubber cup to install the windshield glass.
11. Lightly press the windshield glass for tight fit.
12. Make flush the adhesive surface jutted out using spatula.
13. Connect the wiper deicer connector. (Model with wiper deicer)
14. After completion of all work, allow the vehicle to stand for about 24 hours.
NOTE:
-
When the door is opened/closed after glass is bonded, always lower the door glass and then open/close it carefully.
-
Move the vehicle slowly.
-
For minimum drying time and time the vehicle must be left standing before driving after bonding, follow the instructions or instruction manual
from adhesive manufacturer.
15. After curing of adhesive, pour water on external surface of vehicle to check that there are no water leaks.
NOTE: When a vehicle is returned to the user, tell him or her that the vehicle should not be subjected to heavy impact for at least three days.
16. Install the cowl panel.
