Impreza WRX STI F4-2.5L Turbo (2008)
4) Install the selected weight to the point designated by the wheel balancer.
CAUTION:
^
Degrease the wheel surface where the adhesive type weight will be applied.
^
Press the adhesive type weight by 25 N (2.5 kgs, 5.6 lbf) or more per 5 g (0.18 oz) for 2 seconds or more and attain full adhesion.
^
Total application of the adhesive type weight should be 120 g (4.23 oz) or less.
5) Using the wheel balancer, measure the wheel balance again. Check that wheel balance is correctly adjusted.
INSPECTION