Impreza WRX STI F4-2.5L Turbo (2008)
INSTALLATION
Install in the reverse order of removal while being careful of the following.
-
Connect the quick connector as shown in the figure.
CAUTION:
-
Check that there is no damage or dust on the quick connector. If necessary, clean seal surface of pipe.
-
When connecting the quick connector, insert the pipe all the way in securely, then operate the push lock.
-
If it is not possible to perform the push lock operation of the retainer, recheck whether the pipe is securely inserted.
-
Confirm that the quick connector is securely connected.