Impreza WRX STI F4-2.5L Turbo (2008)
13) Install an extension cap to the transmission.
NOTE: If extension cap is not available, place vinyl bag over opening and fasten with string to prevent gear oil from leaking.
INSTALLATION
1) Insert the sleeve yoke into the transmission and attach center bearing to body.
Tightening torque: 52 N-m (5.3 kgf-m, 38.3 ft-lb)
2) Align the alignment marks and connect the flange yoke and rear differential.
Tightening torque: 31 N-m (3.2 kgf-m, 23.1 ft-lb)
3) Install the heat shield cover.
4) Install the center exhaust pipe.
5) Install the rear exhaust pipe and muffler.
6) Lower the vehicle.