Impreza WRX STI F4-2.5L Turbo (2008)
5. Apply adhesive in the same procedures as for the windshield glass.
6. Insert the glass locating pin into the hole on side panel and push on the area around the locating pin to secure it.
Then, push lightly all around the area to seal it.
7. After completion of all work, allow the vehicle to stand for about 24 hours.
NOTE:
-
When door is opened/closed after glass is bonded, always lower the door glass first, and then open/close it carefully.
-
Move the vehicle slowly.
-
For minimum drying time and vehicle standing time before driving after bonding, follow instructions or instruction manual from the adhesive
manufacturer.
8. After curing of adhesive, pour the water on external surface of vehicle to check that there are no water leaks.
NOTE: When a vehicle is returned to the user, tell him or her that the vehicle should not be subjected to heavy impact for at least three days.
