Impreza WRX Wagon F4-2.0L DOHC Turbo (2002)
Cruise Control Switch: Service and Repair
Cruise Control Main Switch
REMOVAL
1. Disconnect the ground terminal from battery.
2. Remove the screws and clip from the instrument panel lower cover.
3. Remove the instrument panel lower cover.
4. Disconnect the connector from the cruise control main switch(A).
5. Remove the main switch by pushing it outward.
INSTALLATION
Install is in the reverse order of removal.
Cruise Control Command Switch
REMOVAL
WARNING: Before servicing, be sure to read the notes in the AB section for proper handling of the driver's airbag module.
1. Set the front wheels in straight ahead position.
2. Turn ignition switch OFF.
3. Disconnect the ground terminal from battery and wait for at least 20 seconds before starting work.