Impreza WRX Wagon F4-2.0L DOHC Turbo (2002)
![background image](/subaru/impreza_wrx_wagon/f4-2.0l_dohc_turbo/Page-527001.png)
Radiator: Testing and Inspection
INSPECTION
1. Remove the radiator cap, top off radiator, and attach tester to the radiator in place of cap.
^
Non-Turbo model
^
Turbo model
2. Apply a pressure of 157 kPa (1.6 kg/cm2, 23 psi) to the radiator to check if:
1. Engine coolant leaks at/around radiator.
2. Engine coolant leaks at/around hoses or connections.
CAUTION:
^
Engine should be off.
^
Wipe engine coolant from check points in advance.
^
Be careful to prevent engine coolant from spurting out when removing tester.
^
Be careful also not to deform filler neck of radiator when installing or removing tester.