Impreza WRX Wagon F4-2.0L DOHC Turbo (2002)
5. Connect the evaporation hose to the pipe.
6. Insert the fuel filler hose (A) approximately 35 - 40 mm (1.38 - 1.57 in) over the lower end of fuel filler pipe and tighten the clamp.
CAUTION: Do not allow clips to touch evaporation hose (B) and rear suspension crossmember.
7. Insert the evaporation hose approximately 25 - 30 mm (0.98 - 1.18 in) into the lower end of evaporation pipe and hold the clip.
L = 27.5 ± 2.5 mm (1.083 ± 0.098 in)
8. Tighten the bolt which holds the fuel filler pipe bracket on the body.
Tightening Torque: ................................................................................................................................................... 7.5 Nm (0.75 kgf-m, 5.4 ft. lbs)