Impreza WRX Wagon F4-2.0L DOHC Turbo (2002)
8. Using ST, loosen the lock nut.
ST 926230000 SPANNER
9. Tighten the adjusting screw until it no longer tightens.
10. Using a wrench [32 mm (1.26 inch) width across flats] or adjustable wrench, remove the tie-rod.
CAUTION:
^
Check ball joint for free play, and tie-rod for bends. Replace if necessary.
^
Check dust seals used with tie-rod end ball joint for damage or deterioration. Replace if necessary.
11. Loosen the adjusting screw and remove the spring and sleeve.
CAUTION: Replace spring and/or sleeve if damaged.
12. Remove the two bolts securing valve assembly.