Impreza WRX Wagon F4-2.0L DOHC Turbo (2002)
Hydraulic Hose: Service and Repair
A: REMOVAL
1. Remove the air cleaner case. (Non-turbo model)
2. Remove the intercooler. (Turbo model)
3. Drain the clutch fluid.
4. Remove the clutch pipe from the clutch hose and master cylinder.
5. Pull out the clamp, then remove the clutch hose from bracket.
6. Remove the hose from operating cylinder.
7. Remove the bracket.
B: INSTALLATION
Install in the reverse order of removal.
NOTE: Bleed the clutch fluid.
Tightening torque:
T1: 15 Nm (1.5 kgf-cm, 10.8 ft. lbs.)
T2: 18 Nm (1.8 kgf-cm, 13.0 ft. lbs.)
T3: 25 Nm (25 kgf-cm, 18.1 ft. lbs.)