Impreza WRX Wagon F4-2.0L DOHC Turbo (2002)
11. Remove the propeller shaft from the transmission.
CAUTION:
^
Not to damage oil seals and frictional surface of sleeve yoke.
^
Cover the center exhaust pipe with a cloth to keep off any ATF or oil spilled from transmission when removing propeller shaft.
NOTE:
^
Be sure to use an empty oil can to catch oil flowing out when removing propeller shaft.
^
Be sure to plug the opening in transmission after removal of propeller shaft.
12. Install the extension cap to transmission.
NOTE: If extension cap is not available, place vinyl bag over opening and fasten with string to prevent gear oil or ATF from leaking.
B: INSTALLATION
1. Insert the sleeve yoke into the transmission and attach center bearing to body.
Tightening torque: 52 Nm (5.3 kgf-cm, 38.3 ft. lbs.)
2. Align the matching marks and connect the flange yoke and rear differential.