Impreza WRX Wagon F4-2.0L DOHC Turbo (2002)
3. Remove the circlip from SFJ outer race using screwdriver.
4. Remove the SFJ outer race from shaft assembly.
5. Wipe off grease.
CAUTION: The grease is a special grease. Do not confuse with other greases.
6. Place alignment mark on free ring and trunnion.
7. Remove the free ring from trunnion.
CAUTION: Be careful with the free ring position.
8. Place alignment mark on trunnion and shaft.
9. Remove the snap ring and trunnion.
CAUTION: Be sure to wrap shaft splines with vinyl tape to prevent boot from scratches.
10. Remove the SFJ boot.