Impreza WRX Wagon F4-2.0L DOHC Turbo (2002)
5. Insert the spring pin.
6. Mount the cushion rubber on the body.
Tightening torque: 18 Nm (1.8 kgf-cm, 13.0 ft. lbs.)
7. Connect the rod to the joint.
Tightening torque: 18 Nm (1.8 kgf-cm, 13.0 ft. lbs.)
8. Connect the stay to transmission bracket.
Tightening torque: 18 Nm (1.8 kgf-cm, 13.0 ft. lbs.)
9. Install the heat shield cover. (If equipped)
10. Install the rear exhaust pipe and muffler.