Justy L3-1189cc 1.2L (1987)
7.
Remove water pump cover and impeller, then the water pipe, Fig. 38. Use a screwdriver to prevent balancer shaft from rotating when removing
impeller.
8.
Remove oil pump cover attaching bolts, then the cover and inner and outer rotors.
9.
Remove crankcase cover.
10.
Remove connecting rod cap nuts, then tap piston/rod assemblies from underneath with hammer handle and remove assemblies from crankcase.
Fig. 39 Crankshaft, pistons, & balance shaft. 3-73/1200cc engine
11.
Remove balancer chain, chain guide and oil pump sprocket, Fig. 39.
12.
Remove main bearing cap attaching bolts, then the caps and crankshaft.
13.
Carefully remove balancer shaft from crankcase.
14.
Press piston pins from connecting rod small end using suitable tool.
15.
Ensure all components are clean and free from foreign material, and that oil passages are clear. Coat all friction surfaces with oil or suitable
assembly lubricant.
