subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Cruise Control Module > < Cruise Control - Turn Signal Stalk Works Loose
Page 1
background image

Cruise Control Lever: All Technical Service Bulletins
Cruise Control - Turn Signal Stalk Works Loose

15-41-87 
NUMBER

DATE

04-16-87

APPLICABILITY   1985/86 STATION WAGON, SEDAN, 3 DOOR

SUBJECT:

ACCESSORY CRUISE CONTROL

FIGURE 1

The accessory cruise control turn signal stalk screw may become loose after a period of time because of vibration. (Figure 1)

To prevent the loosening of this screw, remove it using a #0 Phillips screw driver, clean the threads, and apply 1 drop of Loctite Removable
Threadlocker 242 on the threaded portion of the screw and reinstall.

If the screw is removed for any service work after the application of Loctite, clean the threads and reapply the Loctite using the same procedure as above.
WARRANTY INFORMATION

Failure Code ZC0-23 Labor Operation 102-211 0.2

Cruise Control Module > < Cruise Control - Turn Signal Stalk Works Loose