subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Security System - Operation, Wiring, Troubleshooting|Page 3365 > < Security System - Operation, Wiring, Troubleshooting|Page 3363
Page 5
background image

4)

Test between pins 85 and 86 on the relay. You should read approximately 87 ohms of resistance.

5)

Apply 12 volts to pin 86 and ground pin 85, then test for continuity between pin 30 and pin 87. The volt/ohmmeter should read infinity.

Security System - Operation, Wiring, Troubleshooting|Page 3365 > < Security System - Operation, Wiring, Troubleshooting|Page 3363