L-Series Wagon 2WD F4-1781cc 1.8L SOHC (MPFI) (1985)
FIGURE 4
4.
Push tool handle toward front of vehicle only as required to release fulcrum tangs from spring loop. Refer to Figure #4.
FIGURE 5
5.
While holding the torsion spring, lower the fulcrum and place fulcrum extension over the existing fulcrum. Refer to Figure #5.
FIGURE 4
6.
Re-align fulcrum tangs with torsion spring loop and slowly release spring torque. Refer to Figure #4.
7.
Repeat procedure for opposite side.
8.
Installation complete.