subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Trunk / Liftgate Latch Release Cable > < Trunk Room Trim|Page 5627
Page 2
background image

4. Turn over the weather strip, and remove the clips.

5. Remove the clips (A), remove the rear gate lower trim.

6. Remove the rear gate weather strip.

NOTE:  If the weather strip clip is removed with excessive force, the weatherstrip may be damaged. Be sure to use a clip remover to remove.

INSTALLATION

Install in the reverse order of removal.

Trunk / Liftgate Latch Release Cable > < Trunk Room Trim|Page 5627