Legacy F4-2.5L DOHC Turbo (2005)
Lateral Accelerometer: Service and Repair
REMOVAL
1. Disconnect the ground cable from battery.
2. Remove the console box.
3. Disconnect the connector from G sensor.
4. Remove the G sensor from body.
CAUTION:
^
Do not drop or bump the G sensor.
^
Since G sensor is a unit with the bracket, do not disassemble them.
INSTALLATION
Install in the reverse order of removal.
CAUTION: Do not drop or bump the G sensor.
Tightening torque: 7.5 Nm (0.76 kgf-m, 5.5 ft. lbs.)