Legacy F4-2.5L DOHC Turbo (2005)
6. Assemble the strut and adjuster, and then secure the secondary side brake shoe with shoe holddown pin and cup.
NOTE:
^
Install the strut spring of both right and left wheel facing vehicle front.
^
Install the adjuster assembly with screw on left side.
7. Install the secondary return spring and adjusting spring.
8. Adjust the parking brake.
9. Drive the vehicle for parking brake lining "break-in".
1
Drive the vehicle at about 35 km/in (22 MPH).
2
With the parking brake release button pushed in, pull the parking brake lever gently.
3
Drive the vehicle for about 200 m (0.12 mile) in this condition.
4
Wait 5 to 10 minutes for the parking brake to cool down. Repeat once more from step (1).
5
After breaking-in, re-adjust the parking brakes.