Legacy F4-2.5L DOHC Turbo (2005)
1
Align the mark (A) on crank sprocket with the mark on oil pump cover at cylinder block.
2
Align single line mark (A) on the exhaust cam sprocket (RH) with notch (B) on timing belt cover.
3
Align single line mark (A) on the intake cam sprocket (RH) with notch (B) on timing belt cover. (Ensure double lines (C) on intake and
exhaust cam sprockets are aligned.)
4
Align single line mark (A) on exhaust cam sprocket (LH) with notch (B) on timing belt cover by turning the sprocket counterclockwise (as
viewed from front of engine).
5
Align single line mark (A) on intake cam sprocket (LH) with notch (B) on timing belt cover by turning the sprocket clockwise (as viewed from
front of engine). Ensure double lines (C) on intake and exhaust cam sprockets are aligned.