Legacy F4-2.5L DOHC Turbo (2005)
8. Remove the front oxygen (A/F) sensor.
CAUTION: When removing the oxygen (A/F) sensor, wait until exhaust pipe cools; otherwise, it will damage exhaust pipe.
INSTALLATION
1. Before installing front oxygen (A/F) sensor, apply anti-seize compound only to the threaded portion of front oxygen (A/F) sensor to make the next
removal easier.
Anti-seize compound: SS-30 JET LUBE
CAUTION: Never apply anti-seize compound to protector of front oxygen (A/F) sensor.
2. Install the front oxygen (A/F) sensor.
3. Install the service hole cover.
4. Lower the vehicle.
5. Install the front right side wheel.
6. Connect the engine harness to the bracket using clips.