Legacy F4-2.5L DOHC Turbo (2005)
12. Secure the gearbox in a vice using ST.
ST1 926200000 STAN D
ST2 34199AG000 BOSS D
13. Tighten the holder.
Tightening torque: 70 Nm (7.1 kgf-cm, 51.6 ft. lbs.)
14. Using ST, caulk the gearbox cylinder at 2 mm (0.08 inch) from end to make punch hole 2 to 2.5 mm (0.08 to 0.10 inch) in diameter.
ST 34099FA060 PUNCH HOLDER