Legacy F4-2.5L DOHC Turbo (2005)
^
5AT
5. Install a new clump paying attention to the installing direction.
6. Insert the tip of inner cable into connector hole of the select lever, and fix the cable to bracket.
7. Shift the select lever to N range, and then adjust the select cable position.
8. Install the heat shield cover.
9. Install the front, center and rear exhaust pipes and muffler. (SOHC and DOHC non-turbo model)
10. Install the center and rear exhaust pipe and muffler. (DOHC turbo model)
INSPECTION
Check the removed cable and replace or adjust if damaged, rusty or malfunctioning.
1. Check for smooth operation of the cable.
2. Check the inner cable for damage and rust.