Legacy F4-2.5L DOHC Turbo (2005)
T1: 15 Nm (1.5 kgf-cm, 10.8 ft. lbs.)
T2: 18 Nm (1.8 kgf-cm, 13.0 ft. lbs.)
2. Connect the push rod of master cylinder to clutch pedal, and install the clevis pin and snap pin.
NOTE: Apply grease to the clevis pin.
3. After bleeding air from the clutch system, ensure that clutch operates properly.
4. Install the air intake chamber.
DISASSEMBLY
1. Remove the straight pin and reservoir tank.
2. Remove the oil seal.